Three Common Methods For Web Data Extraction

Three Common Methods For Web Data Extraction

Probably the most common technique used traditionally to extract data from web pages this is to cook up some regular expressions that match the pieces you want (e.g., URL's and link titles). Our screen-scraper software actually started out as an application written in Perl for this very reason. In addition to regular expressions, you might also use some code written in something like Java or Active Server Pages to parse out larger chunks of text. Using raw regular expressions to pull out the data can be a little intimidating to the uninitiated, and can get a bit messy when a script contains a lot of them. At the same time, if you're already familiar with regular expressions, and your scraping project is relatively small, they can be a great solution.

Other techniques for getting the data out can get very sophisticated as algorithms that make use of artificial intelligence and such are applied to the page. Some programs will actually analyze the semantic content of an HTML page, then intelligently pull out the pieces that are of interest. Still other approaches deal with developing "ontologies", or hierarchical vocabularies intended to represent the content domain.

There are a number of companies (including our own) that offer commercial applications specifically intended to do screen-scraping. The applications vary quite a bit, but for medium to large-sized projects they're often a good solution. Each one will have its own learning curve, so you should plan on taking time to learn the ins and outs of a new application. Especially if you plan on doing a fair amount of screen-scraping it's probably a good idea to at least shop around for a screen-scraping application, as it will likely save you time and money in the long run.

So what's the best approach to data extraction? It really depends on what your needs are, and what resources you have at your disposal. Here are some of the pros and cons of the various approaches, as well as suggestions on when you might use each one:

Raw regular expressions and code

Advantages:

- If you're already familiar with regular expressions and at least one programming language, this can be a quick solution.

- Regular expressions allow for a fair amount of "fuzziness" in the matching such that minor changes to the content won't break them.

- You likely don't need to learn any new languages or tools (again, assuming you're already familiar with regular expressions and a programming language).

- Regular expressions are supported in almost all modern programming languages. Heck, even VBScript has a regular expression engine. It's also nice because the various regular expression implementations don't vary too significantly in their syntax.

Disadvantages:

- They can be complex for those that don't have a lot of experience with them. Learning regular expressions isn't like going from Perl to Java. It's more like going from Perl to XSLT, where you have to wrap your mind around a completely different way of viewing the problem.

- They're often confusing to analyze. Take a look through some of the regular expressions people have created to match something as simple as an email address and you'll see what I mean.

- If the content you're trying to match changes (e.g., they change the web page by adding a new "font" tag) you'll likely need to update your regular expressions to account for the change.

- The data discovery portion of the process (traversing various web pages to get to the page containing the data you want) will still need to be handled, and can get fairly complex if you need to deal with cookies and such.

When to use this approach: You'll most likely use straight regular expressions in screen-scraping when you have a small job you want to get done quickly. Especially if you already know regular expressions, there's no sense in getting into other tools if all you need to do is pull some news headlines off of a site.

Ontologies and artificial intelligence

Advantages:

- You create it once and it can more or less extract the data from any page within the content domain you're targeting.

- The data model is generally built in. For example, if you're extracting data about cars from web sites the extraction engine already knows what the make, model, and price are, so it can easily map them to existing data structures (e.g., insert the data into the correct locations in your database).

- There is relatively little long-term maintenance required. As web sites change you likely will need to do very little to your extraction engine in order to account for the changes.

Disadvantages:

- It's relatively complex to create and work with such an engine. The level of expertise required to even understand an extraction engine that uses artificial intelligence and ontologies is much higher than what is required to deal with regular expressions.

- These types of engines are expensive to build. There are commercial offerings that will give you the basis for doing this type of data extraction, but you still need to configure them to work with the specific content domain you're targeting.

- You still have to deal with the data discovery portion of the process, which may not fit as well with this approach (meaning you may have to create an entirely separate engine to handle data discovery). Data discovery is the process of crawling web sites such that you arrive at the pages where you want to extract data.

When to use this approach: Typically you'll only get into ontologies and artificial intelligence when you're planning on extracting information from a very large number of sources. It also makes sense to do this when the data you're trying to extract is in a very unstructured format (e.g., newspaper classified ads). In cases where the data is very structured (meaning there are clear labels identifying the various data fields), it may make more sense to go with regular expressions or a screen-scraping application.

Screen-scraping software

Advantages:

- Abstracts most of the complicated stuff away. You can do some pretty sophisticated things in most screen-scraping applications without knowing anything about regular expressions, HTTP, or cookies.

- Dramatically reduces the amount of time required to set up a site to be scraped. Once you learn a particular screen-scraping application the amount of time it requires to scrape sites vs. other methods is significantly lowered.

- Support from a commercial company. If you run into trouble while using a commercial screen-scraping application, chances are there are support forums and help lines where you can get assistance.

Disadvantages:

- The learning curve. Each screen-scraping application has its own way of going about things. This may imply learning a new scripting language in addition to familiarizing yourself with how the core application works.

- A potential cost. Most ready-to-go screen-scraping applications are commercial, so you'll likely be paying in dollars as well as time for this solution.

- A proprietary approach. Any time you use a proprietary application to solve a computing problem (and proprietary is obviously a matter of degree) you're locking yourself into using that approach. This may or may not be a big deal, but you should at least consider how well the application you're using will integrate with other software applications you currently have. For example, once the screen-scraping application has extracted the data how easy is it for you to get to that data from your own code?

When to use this approach: Screen-scraping applications vary widely in their ease-of-use, price, and suitability to tackle a broad range of scenarios. Chances are, though, that if you don't mind paying a bit, you can save yourself a significant amount of time by using one. If you're doing a quick scrape of a single page you can use just about any language with regular expressions. If you want to extract data from hundreds of web sites that are all formatted differently you're probably better off investing in a complex system that uses ontologies and/or artificial intelligence. For just about everything else, though, you may want to consider investing in an application specifically designed for screen-scraping.

As an aside, I thought I should also mention a recent project we've been involved with that has actually required a hybrid approach of two of the aforementioned methods. We're currently working on a project that deals with extracting newspaper classified ads. The data in classifieds is about as unstructured as you can get. For example, in a real estate ad the term "number of bedrooms" can be written about 25 different ways. The data extraction portion of the process is one that lends itself well to an ontologies-based approach, which is what we've done. However, we still had to handle the data discovery portion. We decided to use screen-scraper for that, and it's handling it just great. The basic process is that screen-scraper traverses the various pages of the site, pulling out raw chunks of data that constitute the classified ads. These ads then get passed to code we've written that uses ontologies in order to extract out the individual pieces we're after. Once the data has been extracted we then insert it into a database.

Source: http://ezinearticles.com/?Three-Common-Methods-For-Web-Data-Extraction&id=165416

Scraping data from LinkedIn

Scraping data from LinkedIn

How to scrape data from LinkedIn public profile for marketing purposes?

You can scrape data from a LinkedIn public profile using data scraper software. LinkedIn data extraction is most beneficial for marketers and most medium size companies rely on LinkedIn for their marketing purpose.

I would recommend you to use "LinkedIn Lead Extractor" software, which helps to quickly scrape public profiles from LinkedIn. With this tool your can scrape profile link, First Name, Last Name, Email, Phone Address, Twitter id, Yahoo messenger id, Skype Id, Google Talk ID, Job Role, Company Name, Address, Country, Connections. This company has built this tool specially for LinkedIn marketers who are not satisfied with their drop ship supplier's digital data.

LinkedIn advance search provides you the targeted customers profiles list with your requirements like country, country, city, company, job title, and much more.

In few weeks you can developed new ways to set-up differently the sales teams and create a much more technologic environment in the strategy department. An internal platform that generated targeted leads can be of a very big help. You can easily execute go to market to any area or city in so much little time compared with some years ago.

Source: http://www.ahmadsoftware.com/blogs/4/scraping-data-from-linkedin.html

Extract Data from Multiple Web Pages into Excel using import.io

In this tutorial, i will show you how to extract data from multiple web pages of a website or blog and save the extracted data into Excel spreadsheet for further processing.There are various methods and tools to do that but I found them complicated and I prefer to use import.io to accomplish the task.Import.io doesn’t require you to have programming skills.The platform is quite powerful,user-friendly with a lot of support online and above all FREE to use.

You can use the online version of their data extraction software or a desktop application.The online version will be covered in this tutorial.

Let us get started.

Step 1:Find a web page you want to extract data from.
You can extract data such as prices, images, authors’ names, addresses,dates etc

Step 2:Enter the URL for that web page into the text box here and click “Extract data”.

Then click  “Extract data” Import.io will transform the web page into data in seconds.Data such as authors,images,posts published dates and posts title will be pulled from the web page as shown in the image below.

Import.io extracted only 40 posts or articles from the first page of the blog!.
If you visit bongo5.com you will notice that the web page is having a total of 600+ pages at the time of writing this article and each page has 40 posts or articles on it as can be shown by the image below.
Next step will show you how to extract data from multiple pages of the web page into excel.

Step 3:Extract Data from Multiple Web Pages into Excel

Using the import.io online tool you can extract data from 20 web pages maximum.Go to the bottom right corner of the import.io online tool page and click “Download CSV” to save the extracted data from those 20 pages into Excel.
Note:Using the import.io desktop application you can extract an unlimited number of pages and pin point only the data you want to extract.Check out this tutorial on how to use the desktop application.
Once you click “Download CSV” the following pop up window will appear.You can specify the number of pages you want to get data from up to a maximum of 20 pages then click “Go!”
You will need to Sign up for a free account to download that data as a CSV, or save it as an API.If you save it as an API you can go back to the API later to extract new data if the web page is updated without the need to repeat the steps we have done so far.Also, you can use the API for integration into other platforms.
Below image shows 20 rows out of 800 rows of data extracted from the 20 pages of the web page.

Conclusion

The online tool doesn’t offer much flexibility than the desktop application.For example, you can not extract more than 20 pages and you can not pin point the type of data you want to extract.For a more advanced tutorial on how to use the desktop application, you can check out this tutorial I created earlier.

Source URL : http://nocodewebscraping.com/extract-multiple-web-pages-data-into-excel/

4 Web Scraping Tools To Save You Time On Data Extraction

Either you are working on a product website, struggling to add live data feed to your app or merely need to pull out a huge amount of online data for analysis, an accurate web scraping tool can save you loads of time and keep you sane. Here are four powerful web scraping tools to save you from copy-pasting or spending time on writing your own scripts.

Uipath  specializes in developing various process automation software including web scraping and screen scraping software for desktop and web. Uipath web scraper is perfect for non-coders and easily surpasses most common data extraction challenges including page navigation, digging through flash and even scraping PDF files. All you need to do is open the web scraping wizard and simply highlight the data you need to extract. The tool will scrape all the data following this pattern at all pages you’ve chosen and sort it accordingly. You can add as many items for scraping as you like and have them sorted in respective columns. As a result, you receive a neat Excel or CSV document with all the data eliminated from duplicates.

Moreover, Uipath isn’t just about scraping. This software can be used not only for extracting data, but to manipulate the interface of another app, thus establishing data transfers among the two of them. Basically, this tool could be used to conduct any repetitive task a human could do, yet much faster and with higher accuracy.

Pros: You can automate form filling, clicking buttons, navigation etc. Uipath scraper is impressively accurate, fast and simple to use. It “reads” all types of data on screen (JS, HTML, Silverlight and more), plus you can train the software to emulate human actions of various complexity.

Cons: Premium software runs at a premium price. Uipath is an affordable professional solution, but may be a bit too pricey for personal use.

 Import.io  offers you a free desktop app to help you scrap all the data you need from an unlimited amount of web pages. The service treats each page as a potential data source to generate API from. If the page you’ve submitted has been previously processed, you can access its API and get some of the data. In other case, Import.io will guide you through the process of creating the scraping matrix by building connectors (for navigation) or extractors (to pull out the needed data). Afterwards, you submit a request for extraction and it’s typically processed within 24 hours. All the data is private and you can schedule auto refreshments at any chosen period of time.

Pros: The service is easy-to-use with no tech skills needed. It can  pages with data (those that needed login/pass), plus it’s free. Minimalistic effective design and simple navigation comes along.

Cons: Improt.io has hard times navigating through combinations of javascript/POST and cannot navigate from one page to another (e.g. click next, second page etc).  Sometimes, it takes over 24 hours to receive the report.  Besides, it’s a browser-only app, non-compatible with other applications.

Kimono is a popular web scraper among app developers who prefer to power up their products with live data and no additional code. It saves you tons of time when you need to fill up your app with mashing data. Install Kimono Browser bookmarklet; highlight page elements you need to and provide some positive/negative examples to train the tool. After labeling all the data you can download it in CSV/JSON/a web endpoint format. The APIs created for your pages are stored in the cloud and you can run them on schedule. So far, Kimono is free to use with pro and enterprise solutions to be launched soon.

Pros: The tool works pretty fast and works great with scraping newsfeeds and prices. The data is rather accurate.

Cons: No page navigation available and you need to spend quite a lot of time to train Kimono before it starts to pull out the multi items data accurate enough. In general, I’d say Kimono is more of an app mash-ups creator than a full-scale web scraper.

 Screen Scraper  is pretty neat and tackles a lot of difficult tasks including navigation and precise data extractions, however it requires a bit of programming/tokenization skills if you’d like to run it super smooth. Launch the software, add a proxy, start recording the list of your actions and creating extracting patterns (some coding required). Works great with HTML and Javascript, however you should test it with Citrix and other platforms. Basically, screen scraper helps you writing simple web scraping scripts and lets you download the extracted data in txt/csv/excel format.

Pros: When set correctly, there’s no data extraction tasks Screen scraper fails to handle.
Cons: The tool is pricey and you’ll have to go through documentation and have basic coding skills to use it.

Source URL :  http://tech.co/4-web-scraping-tools-save-time-data-extraction-2015-03

ECJ clarifies Database Directive scope in screen scraping case

EC on the legal protection of databases (Database Directive) in a case concerning the extraction of data from a third party’s website by means of automated systems or software for commercial purposes (so called 'screen scraping').

Flight data extracted

The case, Ryanair Ltd vs. PR Aviation BV, C-30/14, is of interest to a range of companies such as price comparison websites. It stemmed from  Dutch company PR Aviation operation of a website where consumers can search through flight data of low-cost airlines  (including Ryanair), compare prices and, on payment of a commission, book a flight. The relevant flight data is extracted from third-parties’ websites by means of ‘screen scraping’ practices.

Ryanair claimed that PR Aviation’s activity:

• amounted to infringement of copyright (relating to the structure and architecture of the database) and of the so-called sui generis database right (i.e. the right granted to the ‘maker’ of the database where certain investments have been made to obtain, verify, or present the contents of a database) under the Netherlands law implementing the Database Directive;

• constituted breach of contract. In this respect, Ryanair claimed that a contract existed with PR Aviation for the use of its website. Access to the latter requires acceptance, by clicking a box, of the airline’s general terms and conditions which, amongst others, prohibit unauthorized ‘screen scraping’ practices for commercial purposes.

Ryanair asked Dutch courts to prohibit the infringement and order damages. In recent years the company has been engaged in several legal cases against web scrapers across Europe.

The Local Court, Utrecht, and the Court of Appeals of Amsterdam dismissed Ryanair’s claims on different grounds. The Court of Appeals, in particular, cited PR Aviation’s screen scraping of Ryanair’s website as amounting to a “normal use” of said website within the meaning of the lawful user exceptions under Sections 6 and 8 of the Database Directive, which cannot be derogated by contract (Section 15).

Ryanair appealed

Ryanair appealed the decision before the Netherlands Supreme Court (Hoge Raad der Nederlanden), which decided to refer the following question to the ECJ for a preliminary ruling: “Does the application of [Directive 96/9] also extend to online databases which are not protected by copyright on the basis of Chapter II of said directive or by a sui generis right on the basis of Chapter III, in the sense that the freedom to use such databases through the (whether or not analogous) application of Article[s] 6(1) and 8, in conjunction with Article 15 [of Directive 96/9] may not be limited contractually?.”

The ECJ’s ruling

The ECJ (without the need of the opinion of the advocate general) ruled that the Database Directive is not applicable to databases which are not protected either by copyright or by the sui generis database right. Therefore, exceptions to restricted acts set forth by Sections 6 and 8 of the Directive do not prevent the database owner from establishing contractual limitations on its use by third parties. In other words, restrictions to the freedom to contract set forth by the Database Directive do not apply in cases of unprotected databases. Whether Ryanair’s website may be entitled to copyright or sui generis database right protection needs to be determined by the competent national court.

The ECJ’s decision is not particularly striking from a legal standpoint. Yet, it could have a significant impact on the business model of price comparison websites, aggregators, and similar businesses. Owners of databases that could not rely on intellectual property protection may contractually prevent extraction and use (“scraping”) of content from their online databases. Thus, unprotected databases could receive greater protection than the one granted by IP law.

Antitrust implications

However, the lawfulness of contractual restrictions prohibiting access and reuse of data through screen scraping practices should be assessed under an antitrust perspective. In this respect, in 2013 the Court of Milan ruled that Ryanair’s refusal to grant access to its database to the online travel agency Viaggiare S.r.l. amounted to an abuse of dominant position in the downstream market of information and intermediation on flights (decision of June 4, 2013 Viaggiare S.r.l. vs Ryanair Ltd). Indeed, a balance should be struck between the need to compensate the efforts and investments made by the creator of the database with the interest of third parties to be granted with access to information (especially in those cases where the latter are not entitled to copyright protection).

Additionally, web scraping triggers other issues which have not been considered by the ECJ’s ruling. These include, but are not limited to trademark law (i.e., whether the use of a company’s names/logos by the web scraper without consent may amount to trademark infringement), data protection (e.g., in case the scraping involves personal data), or unfair competition.


Source URL :http://yellowpagesdatascraping.blogspot.in/2015/07/ecj-clarifies-database-directive-scope.html

An Easy Way For Data Extraction

There are so many data scraping tools are available in internet. With these tools you can you download large amount of data without any stress. From the past decade, the internet revolution has made the entire world as an information center. You can obtain any type of information from the internet. However, if you want any particular information on one task, you need search more websites. If you are interested in download all the information from the websites, you need to copy the information and pate in your documents. It seems a little bit hectic work for everyone. With these scraping tools, you can save your time, money and it reduces manual work.

The Web data extraction tool will extract the data from the HTML pages of the different websites and compares the data. Every day, there are so many websites are hosting in internet. It is not possible to see all the websites in a single day. With these data mining tool, you are able to view all the web pages in internet. If you are using a wide range of applications, these scraping tools are very much useful to you.

The data extraction software tool is used to compare the structured data in internet. There are so many search engines in internet will help you to find a website on a particular issue. The data in different sites is appears in different styles. This scraping expert will help you to compare the date in different site and structures the data for records.

And the web crawler software tool is used to index the web pages in the internet; it will move the data from internet to your hard disk. With this work, you can browse the internet much faster when connected. And the important use of this tool is if you are trying to download the data from internet in off peak hours. It will take a lot of time to download. However, with this tool you can download any data from internet at fast rate.There is another tool for business person is called email extractor. With this toll, you can easily target the customers email addresses. You can send advertisement for your product to the targeted customers at any time. This the best tool to find the database of the customers.

 Source  URL : http://ezinearticles.com/?An-Easy-Way-For-Data-Extraction&id=3517104

A Content Marketer's Guide to Data Scraping

As digital marketers, big data should be what we use to inform a lot of the decisions we make. Using intelligence to understand what works within your industry is absolutely crucial within content campaigns, but it blows my mind to know that so many businesses aren't focusing on it.

One reason I often hear from businesses is that they don't have the budget to invest in complex and expensive tools that can feed in reams of data to them. That said, you don't always need to invest in expensive tools to gather valuable intelligence — this is where data scraping comes in.

Just so you understand, here's a very brief overview of what data scraping is from Wikipedia:

    "Data scraping is a technique in which a computer program extracts data from human-readable output coming from another program."

Essentially, it involves crawling through a web page and gathering nuggets of information that you can use for your analysis. For example, you could search through a site like Search Engine Land and scrape the author names of each of the posts that have been published, and then you could correlate this to social share data to find who the top performing authors are on that website.

Hopefully, you can start to see how this data can be valuable. What's more, it doesn't require any coding knowledge — if you're able to follow my simple instructions, you can start gathering information that will inform your content campaigns. I've recently used this research to help me get a post published on the front page of BuzzFeed, getting viewed over 100,000 times and channeling a huge amount of traffic through to my blog.

Disclaimer: One thing that I really need to stress before you read on is the fact that scraping a website may breach its terms of service. You should ensure that this isn't the case before carrying out any scraping activities. For example, Twitter completely prohibits the scraping of information on their site. This is from their Terms of Service:

    "crawling the Services is permissible if done in accordance with the provisions of the robots.txt file, however, scraping the Services without the prior consent of Twitter is expressly prohibited"

Google similarly forbids the scraping of content from their web properties:

Google's Terms of Service do not allow the sending of automated queries of any sort to our system without express permission in advance from Google.

So be careful, kids.

Content analysis

Mastering the basics of data scraping will open up a whole new world of possibilities for content analysis. I'd advise any content marketer (or at least a member of their team) to get clued up on this.

Before I get started on the specific examples, you'll need to ensure that you have Microsoft Excel on your computer (everyone should have Excel!) and also the SEO Tools plugin for Excel (free download here). I put together a full tutorial on using the SEO tools plugin that you may also be interested in.

Alongside this, you'll want a web crawling tool like Screaming Frog's SEO Spider or Xenu Link Sleuth (both have free options). Once you've got these set up, you'll be able to do everything that I outline below.

So here are some ways in which you can use scraping to analyse content and how this can be applied into your content marketing campaigns:

1. Finding the different authors of a blog

Analysing big publications and blogs to find who the influential authors are can give you some really valuable data. Once you have a list of all the authors on a blog, you can find out which of those have created content that has performed well on social media, had a lot of engagement within the comments and also gather extra stats around their social following, etc.

I use this information on a daily basis to build relationships with influential writers and get my content placed on top tier websites. Here's how you can do it:

Step 1: Gather a list of the URLs from the domain you're analysing using Screaming Frog's SEO Spider. Simply add the root domain into Screaming Frog's interface and hit start (if you haven't used this tool before, you can check out my tutorial here).

Once the tool has finished gathering all the URLs (this can take a little while for big websites), simply export them all to an Excel spreadsheet.

Step 2: Open up Google Chrome and navigate to one of the article pages of the domain you're analysing and find where they mention the author's name (this is usually within an author bio section or underneath the post title). Once you've found this, right-click their name and select inspect element (this will bring up the Chrome developer console).

Within the developer console, the line of code associated to the author's name that you selected will be highlighted (see the below image). All you need to do now is right-click on the highlighted line of code and press Copy XPath.

For the Search Engine Land website, the following code would be copied:

//*[@id="leftCol"]/div[2]/p/span/a

This may not make any sense to you at this stage, but bear with me and you'll see how it works.

Step 3: Go back to your spreadsheet of URLs and get rid of all the extra information that Screaming Frog gives you, leaving just the list of raw URLs – add these to the first column (column A) of your worksheet.
 Step 4: In cell B2, add the following formula:

=XPathOnUrl(A2,"//*[@id='leftCol']/div[2]/p/span/a")

Just to break this formula down for you, the function XPathOnUrl allows you to use the XPath code directly within (this is with the SEO Tools plugin installed; it won't work without this). The first element of the function specifies which URL we are going to scrape. In this instance I've selected cell A2, which contains a URL from the crawl I did within Screaming Frog (alternatively, you could just type the URL, making sure that you wrap it within quotation marks).

Finally, the last part of the function is our XPath code that we gathered. One thing to note is that you have to remove the quotation marks from the code and replace them with apostrophes. In this example, I'm referring to the "leftCol" section, which I've changed to ‘leftCol' — if you don't do this, Excel won't read the formula correctly.

Once you press enter, there may be a couple of seconds delay whilst the SEO Tools plugin crawls the page, then it will return a result. It's worth mentioning that within the example I've given above, we're looking for author names on article pages, so if I try to run this on a URL that isn't an article (e.g. the homepage) I will get an error.

 For those interested, the XPath code itself works by starting at the top of the code of the URL specified and following the instructions outlined to find on-page elements and return results. So, for the following code:

//*[@id='leftCol']/div[2]/p/span/a

We're telling it to look for any element (//*) that has an id of leftCol (@id='leftCol') and then go down to the second div tag after this (div[2]), followed by a p tag, a span tag and finally, an a tag (/p/span/a). The result returned should be the text within this a tag.

Don't worry if you don't understand this, but if you do, it will help you to create your own XPath. For example, if you wanted to grab the output of an a tag that has rel=author attached to it (another great way of finding page authors), then you could use some XPath that looked a little something like this:

//a[@rel='author']

As a full formula within Excel it would look something like this:

=XPathOnUrl(A2,"//a[@rel='author']")

Once you've created the formula, you can drag it down and apply it to a large number of URLs all at once. This is a huge time-saver as you'd have to manually go through each website and copy/paste each author to get the same results without scraping – I don't need to explain how long this would take.

Now that I've explained the basics, I'll show you some other ways in which scraping can be used…

2. Finding extra details around page authors

So, we've found a list of author names, which is great, but to really get some more insight into the authors we will need more data. Again, this can often be scraped from the website you're analysing.

Most blogs/publications that list the names of the article author will actually have individual author pages. Again, using Search Engine Land as an example, if you click my name at the top of this post you will be taken to a page that has more details on me, including my Twitter profile, Google+ profile and LinkedIn profile. This is the kind of data that I'd want to gather because it gives me a point of contact for the author I'm looking to get in touch with.

Here's how you can do it.

Step 1: First we need to get the author profile URLs so that we can scrape the extra details off of them. To do this, you can use the same approach to find the author's name, with just a little addition to the formula:

=XPathOnUrl(A2,"//a[@rel='author']", <strong>"href"</strong>)

The addition of the "href" part of the formula will extract the output of the href attribute of the atag. In Lehman terms, it will find the hyperlink attached to the author name and return that URL as a result.

 Step 2: Now that we have the author profile page URLs, you can go on and gather the social media profiles. Instead of scraping the article URLs, we'll be using the profile URLs.

So, like last time, we need to find the XPath code to gather the Twitter, Google+ and LinkedIn links. To do this, open up Google Chrome and navigate to one of the author profile pages, right-click on the Twitter link and select Inspect Element.

Once you've done this, hover over the highlighted line of code within Chrome's developer tools, right-click and select Copy XPath.

 Step 3: Finally, open up your Excel spreadsheet and add in the following formula (using the XPath that you've copied over):

=XPathOnUrl(C2,"//*[@id='leftCol']/div[2]/p/a[2]", "href")

Remember that this is the code for scraping Search Engine Land, so if you're doing this on a different website, it will almost certainly be different. One important thing to highlight here is that I've selected cell C2 here, which contains the URL of the author profile page and not just the article page. As well as this, you'll notice that I've included "href" at the end because we want the actual Twitter profile URL and not just the words ‘Twitter'.

You can now repeat this same process to get the Google+ and LinkedIn profile URLs and add it to your spreadsheet. Hopefully you're starting to see the value in this, and how it can be used to gather a lot of intelligence that can be used for all kinds of online activity, not least your SEO and social media campaigns.

3. Gathering the follower counts across social networks

Now that we have the author's social media accounts, it makes sense to get their follower counts so that they can be ranked based on influence within the spreadsheet.

Here are the final XPath formulae that you can plug straight into Excel for each network to get their follower counts. All you'll need to do is replace the text INSERT SOCIAL PROFILE URL with the cell reference to the Google+/LinkedIn URL:

Google+:

=XPathOnUrl(<strong>INSERTGOOGLEPROFILEURL</strong>,"//span[@class='BOfSxb']")

LinkedIn:

=XPathOnUrl(<strong>INSERTLINKEDINURL</strong>,"//dd[@class='overview-connections']/p/strong")

4. Scraping page titles

Once you've got a list of URLs, you're going to want to get an idea of what the content is actually about. Using this quick bit of XPath against any URL will display the title of the page:

=XPathOnUrl(A2,"//title")

To be fair, if you're using the SEO Tools plugin for Excel then you can just use the built-in feature to scrape page titles, but it's always handy to know how to do it manually!

A nice extra touch for analysis is to look at the number of words used within the page titles. To do this, use the following formula:

=CountWords(A2)

From this you can get an understanding of what the optimum title length of a post within a website is. This is really handy if you're pitching an article to a specific publication. If you make the post the best possible fit for the site and back up your decisions with historical data, you stand a much better chance of success.

Taking this a step further, you can gather the social shares for each URL using the following functions:

Twitter:

=TwitterCount(<strong>INSERTURLHERE</strong>)

Facebook:

=FacebookLikes(<strong>INSERTURLHERE</strong>)

Google+:

=GooglePlusCount(<strong>INSERTURLHERE</strong>)

Note: You can also use a tool like URL Profiler to pull in this data, which is much better for large data sets. The tool also helps you to gather large chunks of data from other social networks, link data sources like Ahrefs, Majestic SEO and Moz, which is awesome.

If you want to get even more social stats then you can use the SharedCount API, and this is how you go about doing it…

Firstly, create a new column in your Excel spreadsheet and add the following formula (where A2 is the URL of the webpage you want to gather social stats for):

=CONCATENATE("http://api.sharedcount.com/?url=",A2)

You should now have a cell that contains your webpage URL prefixed with the SharedCount API URL. This is what we will use to gather social stats. Now here's the Excel formula to use for each network (where B2 is the cell that contaiins the formula above):

StumbleUpon:

=JsonPathOnUrl(B2,"StumbleUpon")
  Reddit:
  =JsonPathOnUrl(B2,"Reddit")
  Delicious:
 =JsonPathOnUrl(B2,"Delicious")
 Digg:
 =JsonPathOnUrl(B2,"Diggs")
  Pinterest:
 =JsonPathOnUrl(B2,"Pinterest")

LinkedIn:

=JsonPathOnUrl(B2,"Linkedin")

Facebook Shares:

=JsonPathOnUrl(B2,"Facebook.share_count")

Facebook Comments:

=JsonPathOnUrl(B2,"Facebook.comment_count")

Once you have this data, you can start looking much deeper into the elements of a successful post. Here's an example of a chart that I created around a large sample of articles that I analysed within Upworthy.com.

 The chart looks at the average number of social shares that an article on Upworthy receives vs the number of words within its title. This is invaluable data that can be used across a whole host of different on-page elements to get the perfect article template for the site you're pitching to.

See, big data is useful!

5. Date/time the post was published

Along with analysing the details of headlines that are working within a site, you may want to look at the optimal posting times for best results. This is something that I regularly do within my blogs to ensure that I'm getting the best possible return from the time I spend writing.

Every site is different, which makes it very difficult for an automated, one-size-fits-all tool to gather this information. Some sites will have this data within the <head> section of their webpages, but others will display it directly under the article headline. Again, Search Engine Land is a perfect example of a website doing this…

 So here's how you can scrape this information from the articles on Search Engine Land:

=XPathOnUrl(<strong>INSERTARTICLEURL</strong>,"//*[@class='dateline']/text()")

Now you've got the date and time of the post. You may want to trim this down and reformat it for your data analysis, but you've got it all in Excel so that should be pretty easy.

Source : https://moz.com/blog/a-content-marketers-guide-to-data-scraping